- New
UPS Emergency Power Supply for 19 Inch RACK Cabinet 2000VA 1200W Line Interactive AVR LCD UPSmart USB EAST AT-UPS2000R/2-RACK
zł1,253.46
Tax included
The AT-UPS2000R/2-RACK UPS is an advanced emergency power solution designed specifically for installation in professional 19-inch RACK telecommunications cabinets. Thanks to its 3U height and robust construction, it integrates perfectly with servers, NVR recorders, and switches in complex CCTV and IT installations.
The main advantage of the device is the line-interactive technology, which not only ensures immediate switching to battery power in 2 to 7 milliseconds but also actively filters grid voltage by constantly analyzing phase parameters. The built-in automatic voltage regulator (AVR) corrects voltage drops and surges without needing to switch to battery mode, which significantly extends cell lifespan and protects sensitive electronics from fluctuations in the power grid.
The device is fully compatible with modern power supplies equipped with active power factor correction (APFC), making it a universal choice for workstations. A clear, large LCD display on the front panel allows for instant monitoring of voltage levels, frequency, battery capacity, and current power load.
System security is enhanced by integrated EMI/RFI filters, which eliminate electromagnetic interference, as well as dedicated RJ45 port protection for Ethernet lines. Included is specialized UPSmart software, which enables remote management of operating parameters directly from a PC. It is the reliable heart of every security system, guaranteeing continuous operation even in the event of a total mains power failure.
UPS Emergency Power Supply for 19 Inch RACK Cabinet 2000VA 1200W Line Interactive AVR LCD UPSmart USB
Model: EAST AT-UPS2000R/2-RACK
EAN: 6931240095201 SKU: 931095209
- Power supply type: Line-interactive (active grid monitoring)
- 19-inch RACK standard mounting (3U height)
- Apparent power 2000 VA / Active power 1200 W
- Compatibility with active power factor correction (APFC) power supplies
- Built-in automatic voltage regulator AVR
- Clear LCD display indicating operating status and network parameters
- Cold start function (startup without grid voltage)
- RJ45 data line protection (Ethernet filter)
- Integrated EMI/RFI interference filter
- Remote management via USB 2.0 port and UPSmart software
- Two built-in 12V/9Ah AGM batteries
- Three power outputs: 2x Schuko (CEE 7/3) and 1x IEC C13
- Short switching time: typically 2-7 ms
- Automatic restart after power restoration
- Short-circuit, overload, and surge protection
Description
The AT-UPS2000R/2-RACK UPS is an advanced emergency power solution designed specifically for installation in professional 19-inch RACK telecommunications cabinets. Thanks to its 3U height and robust construction, it integrates perfectly with servers, NVR recorders, and switches in complex CCTV and IT installations.
The main advantage of the device is the line-interactive technology, which not only ensures immediate switching to battery power in 2 to 7 milliseconds but also actively filters grid voltage by constantly analyzing phase parameters. The built-in automatic voltage regulator (AVR) corrects voltage drops and surges without needing to switch to battery mode, which significantly extends cell lifespan and protects sensitive electronics from fluctuations in the power grid.
The device is fully compatible with modern power supplies equipped with active power factor correction (APFC), making it a universal choice for workstations. A clear, large LCD display on the front panel allows for instant monitoring of voltage levels, frequency, battery capacity, and current power load.
System security is enhanced by integrated EMI/RFI filters, which eliminate electromagnetic interference, as well as dedicated RJ45 port protection for Ethernet lines. Included is specialized UPSmart software, which enables remote management of operating parameters directly from a PC. It is the reliable heart of every security system, guaranteeing continuous operation even in the event of a total mains power failure.
Specification
Output voltage waveform
Approximated sine wave
Power supply type
Line-interactive
Device power
Active power: 1200 W, Apparent power: 2000 VA
Input parameters
Voltage: 230 V AC ± 25 %, Frequency: 50 / 60 Hz (auto detection)
Output parameters
Voltage: 230 V AC ± 10 %, Frequency: 50 / 60 Hz ± 1 %
Operating times
Switching time: 2 ... 7 ms (typical), max. 10 ms; Charging time (up to 90%): ≤ 8 hours
Battery
2 units - 12V/9Ah AGM (Absorbent Glass Mat)
Estimated runtime
62 min @ 100W, 31 min @ 200W, 16 min @ 300W, 9.5 min @ 500W, 2.5 min @ 800W, 1 min @ 1000W
Connectors and outputs
3 outputs: 2 x CEE 7/3 (Schuko), 1 x IEC C13; USB 2.0 port (PC access); 2 x RJ-45 (filter input/output)
Security systems
Fuse, short-circuit, overload, RJ45 surge protection, Ethernet filter, output voltage filtration, EMI/RFI noise filter
Operating status signaling
LCD display: input/output voltage level, input frequency, battery capacity, load, alarm; Sound signaling
Software functionality
UPSmart software is a comprehensive tool for monitoring the status of the power supply in real-time. It allows for viewing charts of voltage, frequency, and battery charge levels. A key feature is the ability to program automatic and safe shutdown of operating systems in the event of a critical power drop, which prevents data loss. The software supports email/SMS notifications of events, maintains an event log, and enables remote battery testing. It supports Windows (95 to 10) and Linux.
Management and control
Microprocessor control, self-diagnostic function, automatic voltage regulator AVR, automatic restart, APFC compatibility
Environmental conditions
Operating temperature: 0 °C ... 40 °C, Relative humidity: 20 ... 90 % (non-condensing)
Enclosure
Type: 19 inch Rack, Height: 3U, Standard dimensions: 440 x 308 x 132 mm, Dimensions with bracket: 485 x 345 x 132 mm
Contents
1x UPS Power Supply
1x UPSmart software (CD/Link)
1x USB cable
1x User manual
Dimensions, Weight
Product dimensions: 308 x 440 x 132 mm (Depth x Width x Height)
Package dimensions: 400 x 530 x 225 mm (Depth x Width x Height)
Product weight: 15000 g
Weight with packaging: 16118 g
Download
931095209
9 Items
Specific References
- EAN13
- 6931240095201
Comments (0)
No customer reviews for the moment.
The AT-UPS2000R/2-RACK UPS is an advanced emergency power solution designed specifically for installation in professional 19-inch RACK telecommunications cabinets. Thanks to its 3U height and robust construction, it integrates perfectly with servers, NVR recorders, and switches in complex CCTV and IT installations.
The main advantage of the device is the line-interactive technology, which not only ensures immediate switching to battery power in 2 to 7 milliseconds but also actively filters grid voltage by constantly analyzing phase parameters. The built-in automatic voltage regulator (AVR) corrects voltage drops and surges without needing to switch to battery mode, which significantly extends cell lifespan and protects sensitive electronics from fluctuations in the power grid.
The device is fully compatible with modern power supplies equipped with active power factor correction (APFC), making it a universal choice for workstations. A clear, large LCD display on the front panel allows for instant monitoring of voltage levels, frequency, battery capacity, and current power load.
System security is enhanced by integrated EMI/RFI filters, which eliminate electromagnetic interference, as well as dedicated RJ45 port protection for Ethernet lines. Included is specialized UPSmart software, which enables remote management of operating parameters directly from a PC. It is the reliable heart of every security system, guaranteeing continuous operation even in the event of a total mains power failure.