- New
Dual Outdoor PIR + Microwave Anti-masking Grade 2 IP54 Pet Immune Gray Detector SATEL OPAL-PLUS-GY
zł574.41
Tax included
A professional dual detector designed for operation in demanding outdoor and indoor conditions. The device combines two advanced detection technologies: passive infrared (PIR) and a microwave (MW) path, which drastically reduces the number of false alarms caused by atmospheric factors, vegetation movement, or small animals weighing up to 20 kg. Thanks to the use of a digital detection algorithm and dynamic temperature compensation, the detector maintains maximum efficiency regardless of the season and ambient temperature, making it an ideal solution for perimeter protection systems.
One of the most important advantages of this model is the active anti-masking function, which detects attempts to cover or paint over the lens, which is crucial in high-risk intrusion systems. Additionally, the device is equipped with a precise twilight sensor with an open collector (OC) output. This allows the detector to be used not only in an alarm system but also in building automation for intelligent control of lighting, roller shutters, or gates depending on the current intensity of external light.
The housing design is characterized by a high IP54 ingress protection rating and high mechanical resistance and UV resistance, which guarantees many years of trouble-free operation outside buildings. An innovative solution is the ability to remotely configure the sensitivity of both detection paths using the OPT-1 remote control, which significantly facilitates the installation and tuning process of the system without the need to open the device housing multiple times. The gray color of the housing allows for discreet installation on building facades with modern architecture, ensuring an aesthetic appearance while maintaining the highest level of security.
Dual Outdoor PIR + Microwave Anti-masking Grade 2 IP54 Pet Immune Gray Detector
Model: SATEL OPAL-PLUS-GY
EAN: 6931240036051 SKU: 931036055
- Dual technology: Passive Infrared (PIR) + Microwave (MW) 24 GHz
- Active IR anti-masking implemented in the infrared path
- Built-in twilight sensor for automation control (OC output)
- Pet immunity for animals weighing up to 20 kg
- IP54 ingress protection rating and UV protection
- Remote sensitivity configuration via OPT-1 infrared remote control
- Compliance with EN 50131-2-2 Grade 2 standard
- Digital temperature compensation and advanced detection algorithm
- Tamper protection against enclosure opening and detachment from the surface
- Creep zone control directly under the detector
Description
A professional dual detector designed for operation in demanding outdoor and indoor conditions. The device combines two advanced detection technologies: passive infrared (PIR) and a microwave (MW) path, which drastically reduces the number of false alarms caused by atmospheric factors, vegetation movement, or small animals weighing up to 20 kg. Thanks to the use of a digital detection algorithm and dynamic temperature compensation, the detector maintains maximum efficiency regardless of the season and ambient temperature, making it an ideal solution for perimeter protection systems.
One of the most important advantages of this model is the active anti-masking function, which detects attempts to cover or paint over the lens, which is crucial in high-risk intrusion systems. Additionally, the device is equipped with a precise twilight sensor with an open collector (OC) output. This allows the detector to be used not only in an alarm system but also in building automation for intelligent control of lighting, roller shutters, or gates depending on the current intensity of external light.
The housing design is characterized by a high IP54 ingress protection rating and high mechanical resistance and UV resistance, which guarantees many years of trouble-free operation outside buildings. An innovative solution is the ability to remotely configure the sensitivity of both detection paths using the OPT-1 remote control, which significantly facilitates the installation and tuning process of the system without the need to open the device housing multiple times. The gray color of the housing allows for discreet installation on building facades with modern architecture, ensuring an aesthetic appearance while maintaining the highest level of security.
Specification
Application
Outdoor / Indoor - ideal for perimeter property protection
Detection technology
Dual - Passive Infrared (PIR) + Microwave (MW) 24 GHz
Pyroelement
Dual high-quality low-noise
Detection range and angle
Maximum 12 x 15 meters at a 100-degree viewing angle
Mounting
Recommended height 2.4 meters; can be mounted on a flat wall or bracket
Sensitivity adjustment
16-level, independent for both paths (buttons on the board or OPT-1 remote)
Alarm outputs
NC (40 mA / 16 V DC) - relay
Tamper output
NC - protection against enclosure opening and detachment from the surface
LED signaling
Green (MW), Yellow (PIR), Red (Alarm) - programmable operating modes
Security features
Active IR anti-masking, creep zone control, pet immunity up to 20kg
Standards and certificates
EN 50131-2-2 Grade 2, EN 50130-4, EN 50130-5 Class IIIa
Electrical parameters
Power supply 12 V DC (+/- 15%), current consumption 20 mA (maximum 160 mA)
Environmental conditions
Operating temperature from -40 °C to 55 °C; IP54 ingress protection rating
Physical parameters
Dimensions 138 x 65 x 58 mm; Color gray (GY); UV-resistant housing
Software and configuration
The detector's operating system is based on advanced digital signal processing (DSP), which integrates data from two independent sensors: passive infrared and a microwave sensor operating in the 24 GHz band. The firmware implements a unique detection algorithm that analyzes the amplitude, duration, and frequency of signals in real-time, effectively distinguishing human movement from environmental interference. A key functionality of the configuration interface is the support for remote programming using the OPT-1 infrared remote control. Thanks to this, the installer has access to 16 sensitivity levels for each of the detection paths, which allows for perfect adjustment of the device to the specifics of the protected area without the need for physical contact with the electronics. The detector software also manages an intelligent twilight sensor, allowing for the programming of OC output activation thresholds, which integrates the alarm system with home automation (e.g., controlling external lighting). Additionally, the software monitors the supply voltage status and the correct operation of the detection paths, signaling potential failures via LEDs.
Contents
1x OPAL-PLUS-GY dual detector
1x Mounting accessories
1x User and installation manual
Dimensions, Weight
Product dimensions: 58 x 65 x 138 mm (D x W x H)
Packaging dimensions: 65 x 70 x 160 mm (D x W x H)
Product weight: 172 g
Weight with packaging: 224 g
Zum Download
931036055
3 Items
Specific References
- EAN13
- 6931240036051
Comments (0)
No customer reviews for the moment.
A professional dual detector designed for operation in demanding outdoor and indoor conditions. The device combines two advanced detection technologies: passive infrared (PIR) and a microwave (MW) path, which drastically reduces the number of false alarms caused by atmospheric factors, vegetation movement, or small animals weighing up to 20 kg. Thanks to the use of a digital detection algorithm and dynamic temperature compensation, the detector maintains maximum efficiency regardless of the season and ambient temperature, making it an ideal solution for perimeter protection systems.
One of the most important advantages of this model is the active anti-masking function, which detects attempts to cover or paint over the lens, which is crucial in high-risk intrusion systems. Additionally, the device is equipped with a precise twilight sensor with an open collector (OC) output. This allows the detector to be used not only in an alarm system but also in building automation for intelligent control of lighting, roller shutters, or gates depending on the current intensity of external light.
The housing design is characterized by a high IP54 ingress protection rating and high mechanical resistance and UV resistance, which guarantees many years of trouble-free operation outside buildings. An innovative solution is the ability to remotely configure the sensitivity of both detection paths using the OPT-1 remote control, which significantly facilitates the installation and tuning process of the system without the need to open the device housing multiple times. The gray color of the housing allows for discreet installation on building facades with modern architecture, ensuring an aesthetic appearance while maintaining the highest level of security.