- New
Intelligent 12V 24V 10A LCD Battery Charger AGM Gel LiFePO4 Automatic Microprocessor Rectifier MW POWER MW-SC10E
zł228.44
Tax included
The MW-SC10E intelligent battery charger is an advanced device designed for versatility and safety during the charging process. It is an ideal solution for users with various vehicles and devices, from passenger cars and vans, through quads and boats, to lawnmowers, motorcycles, and mopeds. Thanks to its support for a wide range of battery types, including lead-acid, gel, MF, AGM, and modern LiFePO4 cells, this charger becomes a universal tool in any garage or workshop.
A key advantage of the device is the fully automatic, multi-stage charging process controlled by an advanced microprocessor. This system not only optimizes current and voltage parameters in real-time but also allows for the safe maintenance of the battery in a fully charged state for a long time without the risk of overcharging. Additionally, the detection and regeneration function for exhausted batteries allows for restoring the efficiency of units that have been deeply discharged, which significantly extends the lifespan of expensive power components.
Operational safety is at the highest level thanks to a series of built-in protections. The device protects against short circuits, overvoltage, overcharging, and overheating. A very important feature is also the reverse polarity protection, which eliminates the risk of damaging the vehicle's electronics or the charger itself in case of a mistake. A clear LCD display provides the user with all necessary information about the current operating status, voltage, and charging progress, making operation intuitive even for people without specialized technical knowledge. Solid, insulated alligator clips and long cables ensure comfort of work in all conditions.
Intelligent 12V 24V 10A LCD Battery Charger AGM Gel LiFePO4 Automatic Microprocessor Rectifier
Model: MW POWER MW-SC10E
EAN: 6931240033623 SKU: 931033626
- Microprocessor control system
- Fully automatic, multi-stage charging process
- Detection and regeneration of exhausted batteries
- Short-circuit and overvoltage protection
- Overcharge protection
- Thermal protection
- Reverse polarity protection
- Insulated alligator clips
Description
The MW-SC10E intelligent battery charger is an advanced device designed for versatility and safety during the charging process. It is an ideal solution for users with various vehicles and devices, from passenger cars and vans, through quads and boats, to lawnmowers, motorcycles, and mopeds. Thanks to its support for a wide range of battery types, including lead-acid, gel, MF, AGM, and modern LiFePO4 cells, this charger becomes a universal tool in any garage or workshop.
A key advantage of the device is the fully automatic, multi-stage charging process controlled by an advanced microprocessor. This system not only optimizes current and voltage parameters in real-time but also allows for the safe maintenance of the battery in a fully charged state for a long time without the risk of overcharging. Additionally, the detection and regeneration function for exhausted batteries allows for restoring the efficiency of units that have been deeply discharged, which significantly extends the lifespan of expensive power components.
Operational safety is at the highest level thanks to a series of built-in protections. The device protects against short circuits, overvoltage, overcharging, and overheating. A very important feature is also the reverse polarity protection, which eliminates the risk of damaging the vehicle's electronics or the charger itself in case of a mistake. A clear LCD display provides the user with all necessary information about the current operating status, voltage, and charging progress, making operation intuitive even for people without specialized technical knowledge. Solid, insulated alligator clips and long cables ensure comfort of work in all conditions.
Specification
Device type
Intelligent, fully automatic microprocessor charger designed for a wide range of starter and deep-cycle batteries.
Supported voltages
The device operates in 12 V and 24 V DC modes, automatically recognizing the voltage of the connected battery or allowing for manual selection.
Compatible batteries
Supports lead-acid (Wet), gel (Gel), AGM (Absorbent Glass Mat), MF (Maintenance Free) batteries, and modern lithium-iron-phosphate (LiFePO4) cells.
12V charging current
Automatically regulated charging current with a maximum intensity of up to 10 A, allowing for fast and safe charging of large units.
24V charging current
Automatically regulated charging current with a maximum intensity of up to 5 A, optimized for 24-volt power systems.
12V charging voltage
Voltage range from 14.4 V to 16 V DC, adjusted depending on the charging phase and the detected cell type.
24V charging voltage
Voltage range from 28.8 V to 32 V DC, ensuring full saturation of batteries connected in series.
12V capacity (acid)
Support for batteries with a capacity from 4 Ah to 300 Ah, covering motorcycles, passenger cars, and campers.
12V capacity (lithium)
Support for LiFePO4 batteries with a capacity from 2 Ah to 100 Ah, ensuring precise parameters for lithium chemistry.
24V capacity (acid)
Support for batteries with a capacity from 4 Ah to 150 Ah, ideal for trucks, agricultural machinery, and boats.
24V capacity (lithium)
Support for LiFePO4 batteries with a capacity from 2 Ah to 50 Ah, dedicated to modern power systems.
Interface
Clear, backlit LCD display presenting real-time battery voltage, charging current, and the current stage of the process.
Cable length
Equipped with long cables: 1.75 m output cable with terminals and 1.70 m power cable, providing great freedom of movement.
Power consumption
The maximum power consumption from the electrical grid is 175 W, which translates into high energy efficiency of the device.
Control software
Built-in microprocessor firmware manages an intelligent, multi-stage charging cycle. This system executes phases: desulfation (for acid batteries), soft start, constant current charging, constant voltage charging, battery test, and maintenance (buffer) charging. The software constantly monitors temperature and electrical parameters, protecting against overcharging, short circuits, reverse polarity, and overheating. Thanks to advanced logic, the charger can detect damaged cells and attempt to regenerate them, which significantly extends the battery service life.
Contents
1x MW-SC10E Charger
1x Set of cables with alligator clips
1x User manual
Dimensions, Weight
Product dimensions: 60 x 275 x 125 mm (D x W x H)
Packaging dimensions: 105 x 330 x 135 mm (D x W x H)
Product weight: 880 g
Weight with packaging: 1143 g
Zum Download
931033626
15 Items
Specific References
- EAN13
- 6931240033623
Comments (0)
No customer reviews for the moment.
The MW-SC10E intelligent battery charger is an advanced device designed for versatility and safety during the charging process. It is an ideal solution for users with various vehicles and devices, from passenger cars and vans, through quads and boats, to lawnmowers, motorcycles, and mopeds. Thanks to its support for a wide range of battery types, including lead-acid, gel, MF, AGM, and modern LiFePO4 cells, this charger becomes a universal tool in any garage or workshop.
A key advantage of the device is the fully automatic, multi-stage charging process controlled by an advanced microprocessor. This system not only optimizes current and voltage parameters in real-time but also allows for the safe maintenance of the battery in a fully charged state for a long time without the risk of overcharging. Additionally, the detection and regeneration function for exhausted batteries allows for restoring the efficiency of units that have been deeply discharged, which significantly extends the lifespan of expensive power components.
Operational safety is at the highest level thanks to a series of built-in protections. The device protects against short circuits, overvoltage, overcharging, and overheating. A very important feature is also the reverse polarity protection, which eliminates the risk of damaging the vehicle's electronics or the charger itself in case of a mistake. A clear LCD display provides the user with all necessary information about the current operating status, voltage, and charging progress, making operation intuitive even for people without specialized technical knowledge. Solid, insulated alligator clips and long cables ensure comfort of work in all conditions.