- New
Outdoor omnidirectional antenna for meters and measuring devices 3.6dBi gain N-female 430-490MHz UHF 450MHz band IoT TRANS-DATA
zł189.81
Tax included
The LTE450 ATK-DZ3/LTE450 antenna is a professional technical solution designed for the most demanding data transmission systems operating in the 450 MHz band. It is an outdoor antenna with an omnidirectional characteristic, meaning it receives and transmits signals with equal efficiency in the horizontal plane (360 degrees), eliminating the need for precise aiming towards the base station.The main advantage of this model is its energy gain of 3.6 dBi. In practice, this translates into a significant improvement in LTE connection stability, especially in areas with poor signal coverage or inside dense industrial structures. The device has been optimized for operation in a wide frequency range from 430 to 490 MHz, making it an ideal choice not only for the LTE450 standard but also for other radio systems operating in this segment of the UHF band.Compact dimensions are another key feature. With a height of only 85 mm and a diameter of 49 mm, the antenna is extremely discreet. It is designed to be mounted directly on energy meter housings, gas meters, control cabinets, and other measuring devices (IoT/M2M). This makes the installation aesthetic and resistant to mechanical damage.The use of an N-type connector (N-female) guarantees low signal loss at the interface with the coaxial cable and ensures high mechanical resistance of the connection. The solid housing made of high-quality materials is resistant to UV radiation and changing weather conditions, which guarantees the longevity of the product even when installed outdoors.Product advantages:1. Compact design: Small dimensions make the antenna discreet and unobtrusive.2. Durability: A solid housing protects internal components from harsh weather conditions.3. Versatility: Equipped with a standard N-type connector for easy cable matching.4. Easy installation: The design allows for installation directly on device housings, control cabinets, or meters.5. LTE450 optimization: Precise tuning to the 450 MHz frequency guarantees maximum efficiency in this specific band.6. 360-degree characteristic: No need to aim at the transmitter simplifies the system installation and configuration process.
Outdoor omnidirectional antenna for meters and measuring devices 3.6dBi gain N-female 430-490MHz UHF 450MHz band IoT
Model: TRANS-DATA ATK-DZ3/LTE450
EAN: 6931240060391 SKU: 931060398
- Operation in a wide frequency range of 430-490 MHz
- High energy gain of 3.6 dBi
- 360-degree omnidirectional radiation pattern
- Very small dimensions for discreet installation
- Standard and durable N-female connector
- Vertical polarization compliant with network standards
- Durable UV-resistant housing
- Adapted to harsh weather conditions
- Ideal for Smart Metering remote reading systems
- Wide application in industrial telemetry and IoT
Description
The LTE450 ATK-DZ3/LTE450 antenna is a professional technical solution designed for the most demanding data transmission systems operating in the 450 MHz band. It is an outdoor antenna with an omnidirectional characteristic, meaning it receives and transmits signals with equal efficiency in the horizontal plane (360 degrees), eliminating the need for precise aiming towards the base station.
The main advantage of this model is its energy gain of 3.6 dBi. In practice, this translates into a significant improvement in LTE connection stability, especially in areas with poor signal coverage or inside dense industrial structures. The device has been optimized for operation in a wide frequency range from 430 to 490 MHz, making it an ideal choice not only for the LTE450 standard but also for other radio systems operating in this segment of the UHF band.Compact dimensions are another key feature. With a height of only 85 mm and a diameter of 49 mm, the antenna is extremely discreet. It is designed to be mounted directly on energy meter housings, gas meters, control cabinets, and other measuring devices (IoT/M2M). This makes the installation aesthetic and resistant to mechanical damage.The use of an N-type connector (N-female) guarantees low signal loss at the interface with the coaxial cable and ensures high mechanical resistance of the connection. The solid housing made of high-quality materials is resistant to UV radiation and changing weather conditions, which guarantees the longevity of the product even when installed outdoors.Product advantages:1. Compact design: Small dimensions make the antenna discreet and unobtrusive.2. Durability: A solid housing protects internal components from harsh weather conditions.3. Versatility: Equipped with a standard N-type connector for easy cable matching.4. Easy installation: The design allows for installation directly on device housings, control cabinets, or meters.5. LTE450 optimization: Precise tuning to the 450 MHz frequency guarantees maximum efficiency in this specific band.6. 360-degree characteristic: No need to aim at the transmitter simplifies the system installation and configuration process.Specification
Device type
A high-efficiency outdoor omnidirectional antenna designed for operation in UHF radio systems. It features a passive design, meaning it does not require additional power and is ready for operation immediately after connection to the receiving device using an appropriate coaxial cable.
Purpose
The main purpose of the antenna is to amplify the radio signal in bands used by modern LTE450 networks. This is a key solution for ensuring transmission continuity in monitoring systems, remote control, and critical infrastructure where connection stability is a priority.
Operating band
The device has been precisely tuned for operation in a wide range of radio frequencies covering the 430 MHz to 490 MHz range. This allows for effective use of the antenna in LTE450 systems and other telemetry solutions operating in the lower UHF band, ensuring a minimal Standing Wave Ratio (SWR).
Energy gain
The maximum energy gain is 3.6 dBi. This is an optimal value for omnidirectional antennas of such compact dimensions, allowing for effective signal amplification in places where standard internal antennas do not provide a stable connection to the mobile operator's network.
Wave impedance
The input impedance of the antenna is 50 Ohm, which is the standard in professional radio communication. Such matching allows for cooperation with most coaxial cables available on the market (e.g., LMR, RF series) and transceiver devices without generating harmful signal reflections.
Wave polarization
The applied vertical polarization is consistent with the transmission standards of most mobile base stations. This ensures the best signal matching and minimizes losses resulting from polarization mismatch, which is crucial for maintaining high data throughput.
Physical connector type
The antenna is equipped with a solid, integrated N-type connector (N-female). This connector is a standard in professional antenna installations, offering excellent electrical parameters, low attenuation, and high resistance to atmospheric factors and mechanical damage.
Radiation pattern
As an omnidirectional antenna, the device radiates electromagnetic energy evenly in the horizontal plane (360 degrees). This is an ideal solution in situations where the location of the nearest transmitter is not precisely known or when the signal reaches the antenna from multiple directions as a result of reflections.
Construction and housing
The antenna housing features a minimalist design and very small dimensions. Made of high-quality UV-resistant plastic, which prevents the material from crumbling and discoloring under the influence of the sun. The construction is sealed, which protects the internal radiator from moisture.
Environmental resistance
The device is designed for continuous operation in harsh outdoor conditions. It is resistant to a wide range of temperatures, rain, snow, and strong wind gusts. Solid sealing of the N-connector after proper cable installation ensures long-term and trouble-free operation.
Application in Smart Metering systems
The product is primarily dedicated to the energy and industrial sectors. It works perfectly in remote meter reading systems (Smart Metering), smart power grids (Smart Grid), and broadly understood industrial telemetry and IoT systems.
System compatibility
The antenna is fully compatible with all communication devices operating in the LTE 450 MHz standard, including industrial modems, M2M routers, and communication gateways used in building and industrial automation.
Mounting method
Thanks to a universal mounting system, the antenna can be mounted directly on flat surfaces of device housings, control cabinets, or meter boxes. The low weight of the device does not burden the supporting structure, and the compact shape minimizes the risk of accidental snagging.
Warranty and quality
The product is covered by a full 2-year manufacturer's warranty. The TRANS-DATA brand is known for providing high-quality components for wireless systems, which guarantees that the technical parameters provided in the specification are consistent with the actual performance of the device in the field.
Contents
1x Omnidirectional antenna ATK-DZ3/LTE450
Dimensions, Weight
Product dimensions: 49 x 49 x 85 mm (D x W x H)
Package dimensions: 155 x 70 x 70 mm (D x W x H)
Product weight: 240 g
Weight with packaging: 332 g
Zum Download
931060398
8 Items
Specific References
- EAN13
- 6931240060391
Comments (0)
No customer reviews for the moment.
The LTE450 ATK-DZ3/LTE450 antenna is a professional technical solution designed for the most demanding data transmission systems operating in the 450 MHz band. It is an outdoor antenna with an omnidirectional characteristic, meaning it receives and transmits signals with equal efficiency in the horizontal plane (360 degrees), eliminating the need for precise aiming towards the base station.The main advantage of this model is its energy gain of 3.6 dBi. In practice, this translates into a significant improvement in LTE connection stability, especially in areas with poor signal coverage or inside dense industrial structures. The device has been optimized for operation in a wide frequency range from 430 to 490 MHz, making it an ideal choice not only for the LTE450 standard but also for other radio systems operating in this segment of the UHF band.Compact dimensions are another key feature. With a height of only 85 mm and a diameter of 49 mm, the antenna is extremely discreet. It is designed to be mounted directly on energy meter housings, gas meters, control cabinets, and other measuring devices (IoT/M2M). This makes the installation aesthetic and resistant to mechanical damage.The use of an N-type connector (N-female) guarantees low signal loss at the interface with the coaxial cable and ensures high mechanical resistance of the connection. The solid housing made of high-quality materials is resistant to UV radiation and changing weather conditions, which guarantees the longevity of the product even when installed outdoors.Product advantages:1. Compact design: Small dimensions make the antenna discreet and unobtrusive.2. Durability: A solid housing protects internal components from harsh weather conditions.3. Versatility: Equipped with a standard N-type connector for easy cable matching.4. Easy installation: The design allows for installation directly on device housings, control cabinets, or meters.5. LTE450 optimization: Precise tuning to the 450 MHz frequency guarantees maximum efficiency in this specific band.6. 360-degree characteristic: No need to aim at the transmitter simplifies the system installation and configuration process.