- New
5 inch CCTV service test monitor 4K AHD CVI TVI CVBS camera installer tester LCD MS-ACT50-4K-V2
zł883.63
Tax included
The MS-ACT50-4K-V2 service monitor is an advanced diagnostic tool that significantly speeds up and simplifies the installation and maintenance process of CCTV systems. Equipped with a high-quality 5-inch LCD matrix, it offers exceptional brightness and contrast, allowing for precise image quality assessment from cameras even in direct sunlight. The device is fully universal, supporting AHD, HD-CVI, HD-TVI standards, and the classic analog CVBS (PAL/NTSC) signal. Thanks to support for 4K (8MP) resolution, the installer can accurately adjust the focus and viewing angle of the most modern high-resolution cameras directly at the installation site, without the need to run back to the recorder.
A key advantage of this model is the built-in DC 12V power output, which allows for direct powering of the tested camera from the monitor's battery. This eliminates the need for additional power supplies or long extension cords when working at heights. The monitor also features an audio input, allowing for verification of the sound path in monitoring systems. The ergonomic housing with a sunshade and the included wrist strap make working with the device safe and comfortable. The built-in high-capacity lithium-ion battery guarantees long operating time, and charging is performed via a standard USB port, which allows for charging the device even from a power bank or car charger.
Product advantages:
- Full support for AHD, CVI, TVI, and CVBS systems in one device.
- Ability to test cameras with resolutions up to 8MP (4K).
- 12V DC camera power function directly from the monitor.
- Large, clear 5-inch screen with a sunshade.
- Long battery life and universal USB charging.
- Compact dimensions and low weight facilitating work in difficult conditions.
- Intuitive OSD menu in multiple languages.
- Robust construction resistant to difficult installation conditions.
5 inch CCTV service test monitor 4K AHD CVI TVI CVBS camera installer tester LCD
Model: MS-ACT50-4K-V2
EAN: 6931240061442 SKU: 931061447
- Support for AHD, HD-CVI, HD-TVI and CVBS (PAL/NTSC) standards
- Support for high resolutions up to 8MP (4K)
- Built-in 5-inch high-brightness TFT LCD display
- DC 12V / 1A power output for powering tested cameras
- Audio input for testing sound paths
- UTC (Up The Coax) control for camera OSD menu
- Built-in high-capacity Li-Ion battery
- Charging via 5V micro USB port
- Compact housing with sunshade and wrist strap
Description
The MS-ACT50-4K-V2 service monitor is an advanced diagnostic tool that significantly speeds up and simplifies the installation and maintenance process of CCTV systems. Equipped with a high-quality 5-inch LCD matrix, it offers exceptional brightness and contrast, allowing for precise image quality assessment from cameras even in direct sunlight. The device is fully universal, supporting AHD, HD-CVI, HD-TVI standards, and the classic analog CVBS (PAL/NTSC) signal. Thanks to support for 4K (8MP) resolution, the installer can accurately adjust the focus and viewing angle of the most modern high-resolution cameras directly at the installation site, without the need to run back to the recorder.
A key advantage of this model is the built-in DC 12V power output, which allows for direct powering of the tested camera from the monitor's battery. This eliminates the need for additional power supplies or long extension cords when working at heights. The monitor also features an audio input, allowing for verification of the sound path in monitoring systems. The ergonomic housing with a sunshade and the included wrist strap make working with the device safe and comfortable. The built-in high-capacity lithium-ion battery guarantees long operating time, and charging is performed via a standard USB port, which allows for charging the device even from a power bank or car charger.
Product advantages:
- Full support for AHD, CVI, TVI, and CVBS systems in one device.
- Ability to test cameras with resolutions up to 8MP (4K).
- 12V DC camera power function directly from the monitor.
- Large, clear 5-inch screen with a sunshade.
- Long battery life and universal USB charging.
- Compact dimensions and low weight facilitating work in difficult conditions.
- Intuitive OSD menu in multiple languages.
- Robust construction resistant to difficult installation conditions.
Specification
Video standards
Support for AHD (up to 8MP), HD-CVI (up to 8MP), HD-TVI (up to 8MP), and analog PAL/NTSC (CVBS) systems.
Display
5-inch TFT LCD matrix, 800x480 pixel resolution, high brightness, and wide viewing angles.
Video input
1x BNC socket (75 Ohm) for direct camera connection.
Signal testing
Automatic recognition of video format and input resolution.
Power output
DC 12V / 1A for powering cameras directly from the monitor (2.1/5.5mm plug).
Audio test
Mini-jack input for testing microphones and audio paths in cameras.
OSD menu
Graphical on-screen menu allowing for adjustment of brightness, contrast, color saturation, and language selection.
Battery
Built-in 3.7V lithium-polymer battery with 2600mAh capacity.
Operating time
Up to 6-8 hours of continuous operation on a full charge (depending on 12V output load).
Charging
Micro USB port, 5V DC charging voltage, charging time approximately 3-4 hours.
UTC control
Support for the UTC (Up The Coax) protocol allowing control of the camera's OSD menu and PTZ functions via coaxial cable.
Housing
Made of high-quality ABS plastic, equipped with a foldable sunshade.
Software
The device operates under a dedicated real-time operating system (RTOS), which has been optimized for instant startup and stability. The software offers an advanced signal detection module that identifies the video standard (AHD/CVI/TVI) and its technical parameters in a fraction of a second. The user interface is clear and allows for quick navigation using physical buttons on the housing. The system also includes power-saving algorithms that automatically turn off the screen after a set period of inactivity, as well as a diagnostic module monitoring the 12V output voltage, protecting the device against overload.
Operating conditions
Operating temperature from -10°C to +50°C, humidity up to 90% without condensation.
Contents
1x MS-ACT50-4K-V2 service monitor
1x USB-microUSB power cable
1x BNC-BNC cable
1x DC power cable for camera
1x Wrist strap
1x User manual.
Dimensions, Weight
Product dimensions: 40 x 140 x 100 mm (D x W x H)
Package dimensions: 80 x 200 x 150 mm (D x W x H)
Product weight: 450 g
Weight with packaging: 850 g
Zum Download
931061447
7 Items
Specific References
- ean13
- 6931240061442
Comments (0)
No customer reviews for the moment.
The MS-ACT50-4K-V2 service monitor is an advanced diagnostic tool that significantly speeds up and simplifies the installation and maintenance process of CCTV systems. Equipped with a high-quality 5-inch LCD matrix, it offers exceptional brightness and contrast, allowing for precise image quality assessment from cameras even in direct sunlight. The device is fully universal, supporting AHD, HD-CVI, HD-TVI standards, and the classic analog CVBS (PAL/NTSC) signal. Thanks to support for 4K (8MP) resolution, the installer can accurately adjust the focus and viewing angle of the most modern high-resolution cameras directly at the installation site, without the need to run back to the recorder.
A key advantage of this model is the built-in DC 12V power output, which allows for direct powering of the tested camera from the monitor's battery. This eliminates the need for additional power supplies or long extension cords when working at heights. The monitor also features an audio input, allowing for verification of the sound path in monitoring systems. The ergonomic housing with a sunshade and the included wrist strap make working with the device safe and comfortable. The built-in high-capacity lithium-ion battery guarantees long operating time, and charging is performed via a standard USB port, which allows for charging the device even from a power bank or car charger.
Product advantages:
- Full support for AHD, CVI, TVI, and CVBS systems in one device.
- Ability to test cameras with resolutions up to 8MP (4K).
- 12V DC camera power function directly from the monitor.
- Large, clear 5-inch screen with a sunshade.
- Long battery life and universal USB charging.
- Compact dimensions and low weight facilitating work in difficult conditions.
- Intuitive OSD menu in multiple languages.
- Robust construction resistant to difficult installation conditions.