- New
Wireless Magnetic Door and Window Contact Sensor Brown 433MHz 2-Zone Alarm System PARADOX DCTXP2-V2H
zł257.07
Tax included
The Paradox DCTXP2-V2H wireless contact sensor is a professional solution for perimeter protection of buildings. The device is designed to effectively monitor the status of doors and windows, providing the first line of defense against burglary. Thanks to its brown housing, the sensor blends perfectly with dark window frames, ensuring high installation aesthetics.
A key advantage of this model is its dual-zone capability. In addition to the built-in magnetic sensor (reed switch), the DCTXP2-V2H has an additional universal NO/NC input. This allows for the connection of an external wired sensor directly to the transmitter, which effectively allows for the monitoring of two independent points using only one wireless module. This is an extremely economical and flexible solution.
The sensor is characterized by the reliability typical of Paradox products, offering stable radio communication in the 433 MHz band. A range of up to 60 meters in open terrain allows for flexible installation in most detached houses and commercial facilities. Powering with two standard AAA batteries guarantees long life (up to 3 years), which minimizes operating costs and the frequency of maintenance work.
The device is equipped with advanced anti-tamper mechanisms that protect against unauthorized opening of the housing or attempts to tear the sensor from the wall. The equipment, produced in Canada, meets rigorous safety standards, which confirms its high quality and utility in professional intrusion alarm systems (SSWiN). By choosing the Paradox DCTXP2-V2H, you gain operational confidence and the highest standard of protection for your property.
Wireless Magnetic Door and Window Contact Sensor Brown 433MHz 2-Zone Alarm System
Model: PARADOX DCTXP2-V2H
EAN: 6931240059258 SKU: 931059254
- Wireless 433 MHz radio communication (MAGELLAN)
- Universal additional NO/NC alarm input
- Support for two independent zones (built-in reed switch + input)
- Long battery life (up to 3 years)
- Tamper protection (tamper switch)
- Compact brown housing
- High contact operating distance (~10mm)
- Compliance with European safety standards (EN 50130-4)
- Fast input response time (45ms)
Description
The Paradox DCTXP2-V2H wireless contact sensor is a professional solution for perimeter protection of buildings. The device is designed to effectively monitor the status of doors and windows, providing the first line of defense against burglary. Thanks to its brown housing, the sensor blends perfectly with dark window frames, ensuring high installation aesthetics.
A key advantage of this model is its dual-zone capability. In addition to the built-in magnetic sensor (reed switch), the DCTXP2-V2H has an additional universal NO/NC input. This allows for the connection of an external wired sensor directly to the transmitter, which effectively allows for the monitoring of two independent points using only one wireless module. This is an extremely economical and flexible solution.
The sensor is characterized by the reliability typical of Paradox products, offering stable radio communication in the 433 MHz band. A range of up to 60 meters in open terrain allows for flexible installation in most detached houses and commercial facilities. Powering with two standard AAA batteries guarantees long life (up to 3 years), which minimizes operating costs and the frequency of maintenance work.
The device is equipped with advanced anti-tamper mechanisms that protect against unauthorized opening of the housing or attempts to tear the sensor from the wall. The equipment, produced in Canada, meets rigorous safety standards, which confirms its high quality and utility in professional intrusion alarm systems (SSWiN). By choosing the Paradox DCTXP2-V2H, you gain operational confidence and the highest standard of protection for your property.
Specification
System Compatibility
Works with Paradox systems: SPECTRA SP (modules RTX-3, RX-1, K-32_LX), MAGELLAN MG (MG5000, MG5050, MG5075) and Digiplex EVO (modules RTX-3, K-641_LX). Full integration with the radio bus.
Detection Type
Opening of a door or window using the built-in magnetic sensor and support for an external alarm line via a dedicated input.
Magnetic Parameters
The opening distance of the reed switch contacts is approximately 10 mm, which allows for stable operation even with inaccurately fitted window casements.
Event Signaling
Immediate transmission of alarm signals, tamper statuses, and low battery alerts directly to the alarm control panel.
Radio Parameters
Operating frequency: 433 MHz. PARADOX MAGELLAN protocol with coding ensuring resistance to signal jamming and interception attempts.
Communication Range
Maximum range in open terrain: up to 60 meters. Inside buildings, the range depends on the construction of walls and ceilings (typically 20-40m).
Additional Inputs
Integrated universal input supporting NO (normally open) or NC (normally closed) modes. Allows transmission of a signal from another wired sensor.
Power Supply
Battery: 2 x 1.5 V AAA alkaline batteries (not included). Device designed for low-voltage operation.
Energy Efficiency
Average operating time on a new set of batteries is approximately 3 years. Maximum current draw during transmission: ≤ 5 mA.
System Reaction
Very short input response time of just 45 ms, which ensures immediate detection of even quick attempts to force an entry.
Protection and Tamper
Built-in tamper switch detecting opening of the housing (Tamper). Possibility to monitor the continuity of the line connected to the additional input.
Certification and Standards
Compliance with European standards: EN 61000-6-3, EN 50130-4 (EMC resistance), EN 60950-1 (safety), ETSI EN 300 220-2 (radio spectrum), EN 50581 (RoHS).
Working Environment
Operating temperature: from -10 °C to 55 °C. Device intended for indoor installation.
Physical Properties
Color: Brown. Transmitter dimensions: 32 x 112 x 25 mm. Magnet dimensions (Type A): 14 x 44 x 16.5 mm. Country of origin: Canada.
Software and Integration
Integration with the Paradox system is based on intelligent alarm control panel software (MG/SP/EVO panel firmware). This software enables full remote configuration of sensor parameters, defining reactions for both zones independently (e.g., zone 1 - immediate alarm, zone 2 - technical alarm) as well as precise monitoring of RSSI signal level and battery status. The system automatically supervises the presence of the sensor (supervision), reporting an error in case of communication loss lasting longer than the programmed time.
Contents
1x DCTXP2-V2H transmitter
1x Magnet in housing (Type A)
1x Set of mounting screws
1x User manual
Dimensions, Weight
Product dimensions: 25 x 32 x 112 mm (D x W x H)
Package dimensions: 40 x 115 x 50 mm (D x W x H)
Product weight: 50 g
Weight including packaging: 72 g
Download
931059254
16 Items
Specific References
- ean13
- 6931240059258
Comments (0)
No customer reviews for the moment.
The Paradox DCTXP2-V2H wireless contact sensor is a professional solution for perimeter protection of buildings. The device is designed to effectively monitor the status of doors and windows, providing the first line of defense against burglary. Thanks to its brown housing, the sensor blends perfectly with dark window frames, ensuring high installation aesthetics.
A key advantage of this model is its dual-zone capability. In addition to the built-in magnetic sensor (reed switch), the DCTXP2-V2H has an additional universal NO/NC input. This allows for the connection of an external wired sensor directly to the transmitter, which effectively allows for the monitoring of two independent points using only one wireless module. This is an extremely economical and flexible solution.
The sensor is characterized by the reliability typical of Paradox products, offering stable radio communication in the 433 MHz band. A range of up to 60 meters in open terrain allows for flexible installation in most detached houses and commercial facilities. Powering with two standard AAA batteries guarantees long life (up to 3 years), which minimizes operating costs and the frequency of maintenance work.
The device is equipped with advanced anti-tamper mechanisms that protect against unauthorized opening of the housing or attempts to tear the sensor from the wall. The equipment, produced in Canada, meets rigorous safety standards, which confirms its high quality and utility in professional intrusion alarm systems (SSWiN). By choosing the Paradox DCTXP2-V2H, you gain operational confidence and the highest standard of protection for your property.