- New
24V 10A 276W Switching Buffer Power Supply for CCTV and Access Control Systems Grade 2 IP20 Metal Housing PULSAR HPSG2-24V10A-D
zł801.96
Tax included
The HPSG2-24V10A-D buffer power supply is a professional switching device designed for the uninterruptible power supply of security systems requiring a stable 24V DC voltage. It is an ideal solution for alarm control panels, access control systems, CCTV cameras, and modern intercom systems. The device is manufactured in accordance with strict safety standards EN50131-6:2017 and EN60839-11:2013, confirming its suitability for Grade 1 and 2 security installations.
The advantage of the power supply is its high energy efficiency reaching 87%, which minimizes energy losses and reduces component heating. The device offers intelligent battery charging management with selectable charging current (1A, 2A, or 4A), allowing for optimal compatibility with various cell capacities. In the event of a mains power failure, the power supply immediately switches to battery mode, ensuring continuity of facility protection.
The product is equipped with an advanced diagnostic system with OC-type technical outputs that signal the absence of AC power (EPS) and battery failure or absence (APS). A robust metal housing with space for two 12V/18Ah batteries provides mechanical protection and aesthetic installation. Additional features, such as a dynamic battery test and deep discharge protection, guarantee the longevity of the emergency power system. The power supply also features a built-in forced cooling fan, which is crucial when operating under high loads.
24V 10A 276W Switching Buffer Power Supply for CCTV and Access Control Systems Grade 2 IP20 Metal Housing
Model: PULSAR HPSG2-24V10A-D
EAN: 6931240078860 SKU: 931078865
- Compliance with EN50131-6 Grade 2 and EN60839-11 Grade 2 standards
- High energy efficiency up to 87%
- Wide input voltage range 200V - 240V AC
- Selectable battery charging current: 1A / 2A / 4A
- Advanced EPS and APS technical outputs for fault signaling
- Dynamic battery test and circuit continuity monitoring
- START function for battery-powered startup without AC mains
- Full protection: short-circuit, overload, overvoltage, and tamper protection
- Built-in thermally controlled cooling fan
- Space for two 12V/18Ah or 12V/7Ah batteries
Description
The HPSG2-24V10A-D buffer power supply is a professional switching device designed for the uninterruptible power supply of security systems requiring a stable 24V DC voltage. It is an ideal solution for alarm control panels, access control systems, CCTV cameras, and modern intercom systems. The device is manufactured in accordance with strict safety standards EN50131-6:2017 and EN60839-11:2013, confirming its suitability for Grade 1 and 2 security installations.
The advantage of the power supply is its high energy efficiency reaching 87%, which minimizes energy losses and reduces component heating. The device offers intelligent battery charging management with selectable charging current (1A, 2A, or 4A), allowing for optimal compatibility with various cell capacities. In the event of a mains power failure, the power supply immediately switches to battery mode, ensuring continuity of facility protection.
The product is equipped with an advanced diagnostic system with OC-type technical outputs that signal the absence of AC power (EPS) and battery failure or absence (APS). A robust metal housing with space for two 12V/18Ah batteries provides mechanical protection and aesthetic installation. Additional features, such as a dynamic battery test and deep discharge protection, guarantee the longevity of the emergency power system. The power supply also features a built-in forced cooling fan, which is crucial when operating under high loads.
Specification
Power supply type
Switching, buffer, designed for continuous operation in alarm and access control systems.
Input voltage
200 V ... 240 V AC, 50 Hz.
Output voltage
Buffer operation: 22.0 V ... 27.6 V DC; Battery operation: 20.0 V ... 27.6 V DC.
Current capacity
Total power supply capacity is 10 A.
Battery management
Charging current selectable via jumpers: 1A / 2A / 4A. Supports 2x7Ah or 2x18Ah batteries.
Device power
Total power supply output is 276 W.
Number of outputs
2 independent power outputs.
Protections
Short-circuit (SCP), overload (OLP), overvoltage (OVP), surge protection, tamper (housing opening), deep discharge protection (UVP).
Signaling and diagnostics
EPS FLT output (AC failure), APS FLT output (battery failure), AC/DC status and fault LEDs.
Efficiency and cooling
Energy efficiency ≤ 87%. Forced cooling via built-in fan.
Standards and certificates
EN 50131-6:2017 Grade 2, EN 60839-11:2013 Grade 2, CE-LVD: EN62368-1, IP20.
Mechanical parameters
Metal housing, white color. Maximum battery dimensions: 450 x 190 x 168 mm.
Operating conditions
Ambient temperature: -10 °C ... 40 °C. Relative humidity: 20 % ... 90 % non-condensing.
Software and logic
The device features a built-in microprocessor controller implementing advanced power management logic. The firmware performs a cyclic, dynamic battery test, measuring internal resistance and voltage under load, which allows for early detection of the need for cell replacement. The charging algorithm protects batteries against sulfation and overcharging, optimizing the process based on the selected charging current. The system also monitors circuit continuity and correct polarity connection, blocking the output if an error is detected, which protects the power supply electronics from damage.
Contents
1x Buffer power supply in metal housing
1x Battery cable set
1x Housing key set
1x User manual
Dimensions, Weight
Product dimensions: 187 x 465 x 395 mm (D x W x H)
Package dimensions: 210 x 475 x 410 mm (D x W x H)
Product weight: 6900 g
Weight with packaging: 7516 g
Zum Download
931078865
4 Items
Specific References
- ean13
- 6931240078860
Comments (0)
No customer reviews for the moment.
The HPSG2-24V10A-D buffer power supply is a professional switching device designed for the uninterruptible power supply of security systems requiring a stable 24V DC voltage. It is an ideal solution for alarm control panels, access control systems, CCTV cameras, and modern intercom systems. The device is manufactured in accordance with strict safety standards EN50131-6:2017 and EN60839-11:2013, confirming its suitability for Grade 1 and 2 security installations.
The advantage of the power supply is its high energy efficiency reaching 87%, which minimizes energy losses and reduces component heating. The device offers intelligent battery charging management with selectable charging current (1A, 2A, or 4A), allowing for optimal compatibility with various cell capacities. In the event of a mains power failure, the power supply immediately switches to battery mode, ensuring continuity of facility protection.
The product is equipped with an advanced diagnostic system with OC-type technical outputs that signal the absence of AC power (EPS) and battery failure or absence (APS). A robust metal housing with space for two 12V/18Ah batteries provides mechanical protection and aesthetic installation. Additional features, such as a dynamic battery test and deep discharge protection, guarantee the longevity of the emergency power system. The power supply also features a built-in forced cooling fan, which is crucial when operating under high loads.