- New
12V 10A CCTV Switching Power Supply 18 Outputs in Keyed Metal Enclosure Delta 12V/10A/PA18
zł158.67
Tax included
The 12V/10A/PA18 switching power supply is a professional solution dedicated to CCTV industrial television systems, alarm systems, and other installations requiring stable 12V DC power. The device is characterized by exceptional functionality thanks to the use of 18 independent power outputs, which allows for the connection of a large number of cameras or sensors without the need for additional splitters. Each of the 18 current paths is precisely protected by a polymer fuse, which guarantees the safety of connected devices in the event of a failure of one of them. Additionally, each output has a dedicated LED that informs the installer in real-time about the presence of voltage on a given channel, which significantly facilitates system diagnostics and maintenance.
One of the key advantages of this model is its solid, metal enclosure designed for wall mounting. The enclosure is lockable with a key, which effectively protects the interior of the power supply from unauthorized access and accidental mechanical damage. The aesthetic design makes the power supply look good in technical rooms. Inside the enclosure, there is also a main LED indicating the general operation of the device. The power supply offers the possibility of adjusting the output voltage in the range from 11V to 13V DC, which allows for the compensation of voltage drops on long sections of power cables. It is an extremely stable solution based on switching technology, which ensures high energy efficiency and minimal heat loss. However, it should be remembered that for continuous operation (24/7), it is recommended to use a load not exceeding 80% of the maximum current to ensure optimal thermal conditions and component longevity. This product is the foundation of a safe and organized power supply system in modern low-voltage installations.
12V 10A CCTV Switching Power Supply 18 Outputs in Keyed Metal Enclosure
Model: Delta 12V/10A/PA18
EAN: 6931240085516 SKU: 931085517
- 18 independent power outputs with screw terminals
- Each channel protected by a PTC polymer fuse
- LED signaling for each output and main power LED
- Robust metal enclosure with key lock
- Output voltage adjustable in the range of 11V - 13V DC
- High total current capacity of 10A
- Designed for indoor wall mounting
- Switching stabilization ensuring constant operating parameters
Description
The 12V/10A/PA18 switching power supply is a professional solution dedicated to CCTV industrial television systems, alarm systems, and other installations requiring stable 12V DC power. The device is characterized by exceptional functionality thanks to the use of 18 independent power outputs, which allows for the connection of a large number of cameras or sensors without the need for additional splitters. Each of the 18 current paths is precisely protected by a polymer fuse, which guarantees the safety of connected devices in the event of a failure of one of them. Additionally, each output has a dedicated LED that informs the installer in real-time about the presence of voltage on a given channel, which significantly facilitates system diagnostics and maintenance.
One of the key advantages of this model is its solid, metal enclosure designed for wall mounting. The enclosure is lockable with a key, which effectively protects the interior of the power supply from unauthorized access and accidental mechanical damage. The aesthetic design makes the power supply look good in technical rooms. Inside the enclosure, there is also a main LED indicating the general operation of the device. The power supply offers the possibility of adjusting the output voltage in the range from 11V to 13V DC, which allows for the compensation of voltage drops on long sections of power cables. It is an extremely stable solution based on switching technology, which ensures high energy efficiency and minimal heat loss. However, it should be remembered that for continuous operation (24/7), it is recommended to use a load not exceeding 80% of the maximum current to ensure optimal thermal conditions and component longevity. This product is the foundation of a safe and organized power supply system in modern low-voltage installations.
Specification
Power supply type
Switching - a modern and high-efficiency electronic circuit used for voltage stabilization, characterized by lower energy losses compared to transformer power supplies
Output voltage
12 V DC - stabilized DC voltage, required by most industrial cameras and recorders
Output voltage regulation
11 V ... 13 V - built-in mounting potentiometer allowing for precise tuning of the output voltage to eliminate voltage drops on long power lines
Total current capacity
10 A - total output current available for all connected devices, allowing for powering up to 18 cameras with a consumption of 0.5A each
Output power
120 W (rated), 145 W (instantaneous) - parameter defining the power supply's ability to deliver the appropriate amount of energy to receivers
Number of power outputs
18 - the device has 18 independent pairs of screw terminals, which allows for aesthetic and safe power distribution
Output protection
18 PTC polymer fuses - modern reusable protection that automatically restores power after the cause of a short circuit or overload has been removed
Optical LED signaling
Each of the 18 channels has its own LED informing about the presence of voltage, additionally, there is a main operation indicator on the outside of the enclosure
Input voltage
230 V AC (range 100-240V) - standard power supply from the power grid, alternating current with a frequency of 50/60Hz
Connector type
Professional screw cable terminals - allow for quick and permanent installation of wires of various cross-sections without the need for soldering
Enclosure type
Metal, powder-coated - solid construction designed for vertical wall mounting, resistant to mechanical damage
Mechanical protection
Key lock - enclosure door equipped with a cylinder lock, which prevents unauthorized access to the inside of the power supply
Operational recommendations
For continuous 24-hour operation, it is recommended that the load does not exceed 8A (80% of power), which significantly extends the life of the capacitors
Cooling
Passive (convection) - the enclosure has ventilation holes ensuring proper air circulation around the power module
Application
CCTV industrial television, SSWiN alarm systems, KD access control systems, LED decorative lighting, and other low-voltage systems
Contents
1x 12V/10A/PA18 switching power supply in a metal enclosure
2x Key for the enclosure lock
1x Set of mounting screws and wall plugs
1x User manual in Polish
Dimensions, Weight
Product dimensions: 55 x 315 x 207 mm (D x W x H)
Package dimensions: 70 x 340 x 215 mm (D x W x H)
Product weight: 1950 g
Weight with packaging: 2200 g
Zum Download
931085517
16 Items
Specific References
- ean13
- 6931240085516
Comments (0)
No customer reviews for the moment.
The 12V/10A/PA18 switching power supply is a professional solution dedicated to CCTV industrial television systems, alarm systems, and other installations requiring stable 12V DC power. The device is characterized by exceptional functionality thanks to the use of 18 independent power outputs, which allows for the connection of a large number of cameras or sensors without the need for additional splitters. Each of the 18 current paths is precisely protected by a polymer fuse, which guarantees the safety of connected devices in the event of a failure of one of them. Additionally, each output has a dedicated LED that informs the installer in real-time about the presence of voltage on a given channel, which significantly facilitates system diagnostics and maintenance.
One of the key advantages of this model is its solid, metal enclosure designed for wall mounting. The enclosure is lockable with a key, which effectively protects the interior of the power supply from unauthorized access and accidental mechanical damage. The aesthetic design makes the power supply look good in technical rooms. Inside the enclosure, there is also a main LED indicating the general operation of the device. The power supply offers the possibility of adjusting the output voltage in the range from 11V to 13V DC, which allows for the compensation of voltage drops on long sections of power cables. It is an extremely stable solution based on switching technology, which ensures high energy efficiency and minimal heat loss. However, it should be remembered that for continuous operation (24/7), it is recommended to use a load not exceeding 80% of the maximum current to ensure optimal thermal conditions and component longevity. This product is the foundation of a safe and organized power supply system in modern low-voltage installations.