1 Purpose and Functions
The ACTii AC1069 mechanical safe is a robust security solution, designed for the discreet and safe storage of cash, jewellery, important documents, and other high-value items. Thanks to a design suitable for wall mounting, the device provides an excellent level of camouflage, which is a key element of protection against theft and unauthorized access.
The product is widely used in offices, private homes, retail outlets, and hotel rooms. The use of a mechanical double-bit key lock eliminates the need for battery power, making the safe reliable under any conditions and ready for use at any moment without the risk of electronics failure.
Main features:
- ✔ Solid steel construction with high resistance
- ✔ Designed for permanent installation (recessing) in a wall
- ✔ Secure mechanical double-bit key lock
- ✔ Interior equipped with two functional shelves to facilitate organization
- ✔ Body and door plate thickness of 4mm
- ✔ Moving bolts with a diameter of 18 mm ensuring solid door locking
Information about the locking mechanism:
The safe uses a traditional, proven bolting system based on moving steel bolts with a diameter of 18 mm. The use of a double-bit key significantly increases the security level compared to standard simple locks, making manipulation by unauthorized persons difficult.
2 Technical Specification
| Model | ACTii AC1069 |
| EAN | 6931240010693 |
| External dimensions (W x H x D) | 330 x 230 x 200 mm |
| Internal dimensions (W x H x D) | 300 x 200 x 191 mm |
| Body plate thickness | 4 mm |
| Back plate thickness | 2 mm |
| Door thickness | 4 mm |
| Bolt diameter | 18 mm |
| Lock type | Mechanical with double-bit key |
| Number of keys included | 2 pieces |
| Number of shelves | 2 |
| Colour | Beige |
| Product weight | 7.5 kg |
| Contents of the set | Safe, 2x Keys |
3 Installation Instructions
Selecting the installation location:
The safe is intended solely for wall installation. You should choose a wall with appropriate thickness and structural strength (preferably a load-bearing wall, concrete, or solid brick). The location should be dry and not exposed to direct moisture.
Installation steps:
- Prepare an opening in the wall about 2-5 cm larger on each side than the external dimensions of the safe (330x230x200 mm).
- Ensure that the bottom of the opening is level.
- Protect the front of the safe (door and lock) with painter's tape or plastic wrap to prevent the mechanism from getting dirty with masonry mortar.
- Place the safe in the opening, ensuring that the front of the safe is flush with the wall surface (or slightly recessed if you plan to cover it with a painting or panel).
- Fill the gaps around the safe body with high-quality cement mortar or concrete.
- Allow it to dry completely for a minimum of 24-48 hours before the first use of the bolts to avoid shifting the device.
4 Operation and Maintenance Instructions
Opening and closing:
To open the safe, insert the double-bit key into the lock and turn it clockwise until it stops. To lock the safe, close the door and turn the key counter-clockwise, then remove it from the lock.
Maintenance:
- It is recommended to check the smoothness of the bolt operation once every 6 months.
- If necessary, a small amount of dry graphite lubricant can be used to maintain the lock mechanism. Do not use liquid lubricants or oils that may attract dust.
- Clean external surfaces with a soft, dry cloth. Avoid aggressive chemical cleaning agents.
5 Safety and Compliance (EU Standards)
Important warnings:
- NEVER store spare keys inside the safe! If one key is lost, immediately have a copy made or replace the lock.
- The safe is not fireproof or waterproof – paper documents should additionally be protected inside the safe using protective folders.
- Store the keys in a place inaccessible to third parties and children.
- Do not exceed the permitted load of the shelves (recommended max 5kg per shelf with even distribution).
The product meets basic safety requirements. It has a CE declaration of conformity available from the manufacturer. The steel construction was made in accordance with strength standards for home valuables storage devices.