1 Purpose and Functions
The ACTii AC3552 mount is a professional mounting solution designed specifically for the NETATMO NWS01-EC outdoor weather station module. The product features an improved design that ensures full stability – once the station is set in the correct position and the locking screw is tightened, the device remains stationary and does not sag, which is a common problem with standard mounts. Thanks to its versatility, the bracket allows for secure mounting of the station on a wall, ceiling, or soffit, ensuring optimal conditions for meteorological measurements.
Main features:
- ✔ Dedicated mount for the NETATMO NWS01-EC outdoor weather station module.
- ✔ Improved design: the station does not move or sag after tightening the screw.
- ✔ Made of high-quality steel and aluminum, ensuring exceptional durability and resistance.
- ✔ Full range of adjustment: 360° rotation and the ability to tilt laterally by more than 90°.
- ✔ Stable and aesthetic connection after tightening the joint.
- ✔ Possibility of mounting on a wall, ceiling, or soffit.
- ✔ High load capacity of up to 4 kg per mount.
- ✔ Complete mounting kit (screws, nuts, wall plugs) included in the package.
- ✔ Full compatibility with the factory mounting hole of the Netatmo module.
2 Technical Specification
| Model | ACTii AC3552 |
| EAN | 6931240035528 |
| Material | Metal (steel), aluminum |
| Color | Black |
| Height | 63 mm |
| Base diameter | 46 mm |
| Product dimensions | 48 x 48 x 63 mm |
| Product weight | 63 g |
| Maximum load capacity | 4 kg |
| Certificates | CE, RoHS |
| Warranty | 24 Months |
3 Mounting and Setup Instructions
Kit contents:
- 1x Wall/ceiling mount
- Set of expansion wall plugs for wall mounting
- Set of screws and nuts for connecting the mount to the station
- Rubber protective washers
Mounting steps:
- Preparing the location: Select a stable surface (wall, ceiling, or soffit). Ensure that this location allows for clear radio communication between the module and the base station.
- Mounting the base: Use the included plugs and screws to attach the mount base (46 mm diameter) to the selected surface.
- Connection to the station: Screw the mount's mounting bolt into the factory hole located on the bottom of the Netatmo NWS01-EC outdoor module. Use the rubber washers to ensure tightness and protection of the housing.
- Angle adjustment: Loosen the mount joint, set the station to the desired position (360° rotation and 90° tilt possible).
- Locking: Firmly tighten the joint locking screw. Thanks to the improved mechanism design, the station will be locked in the selected position without the risk of subsequent sagging.
4 Safety and Maintenance
Safe use rules:
- Load: Do not exceed the maximum load capacity of the mount (4 kg).
- Mounting: Ensure that the type of expansion plugs is suitable for the material from which the wall is made (concrete, brick, wood).
- Weather conditions: The product is made of corrosion-resistant metal and aluminum; however, it is recommended to periodically check the tightness of the screws, especially after strong winds or sudden temperature changes.
- Maintenance: Clean with a soft, damp cloth. Do not use aggressive chemical agents that could damage the paint coating.
- Mechanical safety: Before mounting, check that all components of the kit are complete and free from mechanical defects.