• Reduced price
  • New

DC 12V DC 3000mA 3A + Distributor 8 Industrial CCTV Cameras AHD IP Overvoltage Protection ACTii AC6464

PLN84.21
PLN81.68 Save 3%
Delivery within 3-4 days.
The set allows to distribute power supply to 8 cameras in a simple professional and aesthetic way

The manifold housing allows it to be mounted with screws or a cable tie to a mast or wall

Distributor made in EU with CE and ROHS certificate

Lockable distributor housing

Each of the 8 power supply outputs has a separate overvoltage protection (fuse), thanks to which in case of intentional or other short circuit of the power cable at one of the cameras there will be no failure of the entire monitoring. This protection also allows you to detect where the failure occurred. A diode is also installed next to each fuse, if the diode is off, the fuse has blown.

The terminal blocks the power supply to 8 outputs, each of which is protected by a polymer fuse and has an LED indicating its operation (no light means "blown" the fuse). When one of the outputs is overloaded, the resistance and temperature of the polymer fuse increases (> 100 ° C), and the LED goes out. A small current flows through the heated fuse. After the cause of the overload ceases, the fuse automatically returns to its original state.

AHD Camera power supply

CVI Camera Power Supply

TVI Camera Power Supply

IP Camera Power Supply

CVBS Camera power supply (analog TV)

Quantity
Product available

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

DC 12V DC 3000mA 3A + Distributor 8 Industrial CCTV Cameras AHD IP Overvoltage Protection

Model: ACTii AC6464

EAN: 6931240064641 SKU: 6464486478

  • Each of the 8 power outputs has a separate overvoltage protection (polymer fuse)
  • The set allows to distribute power supply to 8 cameras in a simple professional and aesthetic way
  • The manifold housing allows it to be mounted with screws or a cable tie to a mast or wall.

Description

The set allows to distribute power supply to 8 cameras in a simple professional and aesthetic way

The manifold housing allows it to be mounted with screws or a cable tie to a mast or wall

Distributor made in EU with CE and ROHS certificate

Lockable distributor housing

Each of the 8 power supply outputs has a separate overvoltage protection (fuse), thanks to which in case of intentional or other short circuit of the power cable at one of the cameras there will be no failure of the entire monitoring. This protection also allows you to detect where the failure occurred. A diode is also installed next to each fuse, if the diode is off, the fuse has blown.

The terminal blocks the power supply to 8 outputs, each of which is protected by a polymer fuse and has an LED indicating its operation (no light means "blown" the fuse). When one of the outputs is overloaded, the resistance and temperature of the polymer fuse increases (> 100 ° C), and the LED goes out. A small current flows through the heated fuse. After the cause of the overload ceases, the fuse automatically returns to its original state.

AHD Camera power supply

CVI Camera Power Supply

TVI Camera Power Supply

IP Camera Power Supply

CVBS Camera power supply (analog TV)

Specification

PSU parameters

Type of power supply: Pulsed stabilized

Output voltage: 12V DC stabilized (direct current)

Current efficiency: 3000mA, 3A

Power: 36W

Supply voltage: 120-240V / 50-60Hz 0.2A MAX.

Output: Plug 2.1 / 5.5 on a 100cm cable

Output: Minus outside the plug, plus inside the plug.

Signaling diode: The correct operation of the power supply. Continuous signal - proper operation of the power supply, LED flashing - short circuit or overload.

Power supply dimensions (L, W, H): 117x50x30mm

Weight: 236g

Distributor parameters

The splitter has two power input sockets that are connected to each other. It does not matter to which connector we supply the power supply, which enables connection either with a DC 2.1 / 5.5 plug or with isolated wires. It also allows series distributors to be connected in series, e.g. power supply to the DC IN socket, from cable terminals (DC IN), by means of a cable to the other power supply.

Number of power outputs: 8

Number of power inputs: 2

Maximum supply voltage: 0-24V (typically 12V) DC

Maximum supply current: 6 A

Maximum current of one output: 1A

Type of fuse links: polymer fuses

Type of power input connectors: 2.1 / 5.5mm socket / cable terminals

Type of power output connectors: Cable terminals

Temp. operating / relative humidity: -55 ° C ... + 55 ° C / <95%

The manifold housing allows it to be mounted with screws or a cable tie to a mast or wall

Kit Contents

Power Supply.

8 camera splitter

Certificates and standards

CE

Compliance

Dimensions, Weight

Product dimensions: 90 x 116 x 36 mm (D x W x H)

Packaging dimensions: 150 x 150 x 45 mm (D x W x H)

Product weight: 83 g

Weight with packaging: 350 g

To download

6464486478
6 Items

Specific References

EAN13
6931240064641