IP camera tester LCD service monitor Touch 4 AHD CVI TVI CVBS PTZ UTP PoE WIFI ONVIF 4K H.264 Android RJ45 ACTii AC1611
Service monitor for CCTV cameras with a lot of additional functions.
Large 4 inch LCD touch screen with high resolution 800x480,
It supports H.264 and 4K resolution
Video signal level tester, PTZ control, Network cable tester, WIFI
Network Cable Tester
Power supply for PoE cameras (48V), cameras for 12V
The tester has many additional applications, e.g.
- POE power output, IP Discovery, ONVIF, IPC Test, Virtual IPC, Network Tool, HIK, DH test tool, UNV Test Tool, Chrome, CVI, TVI, AHD, HD CVBS, DroiNotes, Data monitor, Flashlight, Calculator, Quickoffice , File Explorer, Rapid Video, Rapid IP Discovery, iVMS-4500 HD, gDMSS HD Lite, VLC, EZView Safire EasyView, Safire Control Center, XMEye, Network State, Audio Recorder, Audio Player, Video Player, RtspPlayer
Applications can also be downloaded from the internet (Android operating system).
IP camera tester LCD service monitor Touch 4 AHD CVI TVI CVBS PTZ UTP PoE WIFI ONVIF 4K H.264 Android RJ45
Model: ACTii AC1611
EAN: 6931240016114 SKU: 161120977
- IP Camera Tester using ONVIF and RTSP protocols, AHD, TVI, CVI cameras and analog CVBS cameras
- 4 inch TOUCH LCD screen, Resolution 800x480.
- It supports H.264 and 4K resolution
- WIFI also allows you to test wireless cameras and connect to cameras wirelessly, it can act as a Hotspot
- Video, photo recording and saving to SD card
- PING test: test of IP camera or other devices on the LAN (IP address, port)
- Video signal: level test
- Video signal peak (PEAK) signal sync level (SYNC), series color (COLOR BURST)
- Network cable tester
- IP address: scanning, quick IP address search for connected IP camera and other network devices.
- POE - Camera power supply with POE (48V), voltage meter; PoE switch test, voltage for IP cameras and other devices
- PTZ tester, address scanning.
- RS232 / RS485 / RS42 support, speed 600 to 115200bps - adjustable, support for over 30 protocols: PELCO P, PELCO-D, SAMSUNG.
- Analysis of PTZ protocol, displays control protocol commands to check if RS485 transmission is correct, it is easy to find the cause of the problem
- PTZ control checking. Up / Down / Left / Right, P / T units, lens zoom, focus adjustment, aperture
- Audio input, device reception signal test.
- Lithium Ion Polymer Battery. The device uses advanced control and protection circuit layout.
- Long battery life: 7 hours on normal operation.
- Output for camera power supply: DC 12V 2A and PoE 48V
- Flashlight function with LED - makes work easier at night
- Menu in English, German, Polish, ...
- Micro SD memory card slot: allows you to save photos and videos
- Possibility to install additional applications on android like Skype ...
Description
Tester of IP cameras (ONVIF and RTSP) as well as AHD TVI CVI and analog CVBS cameras
Service monitor for CCTV cameras with a lot of additional functions.
Large 4 inch LCD touch screen with high resolution 800x480,
It supports H.264 and 4K resolution
Video signal level tester, PTZ control, Network cable tester, WIFI
Network Cable Tester
Power supply for PoE cameras (48V), cameras for 12V
The tester has many additional applications, e.g.
- POE power output, IP Discovery, ONVIF, IPC Test, Virtual IPC, Network Tool, HIK, DH test tool, UNV Test Tool, Chrome, CVI, TVI, AHD, HD CVBS, DroiNotes, Data monitor, Flashlight, Calculator, Quickoffice , File Explorer, Rapid Video, Rapid IP Discovery, iVMS-4500 HD, gDMSS HD Lite, VLC, EZView Safire EasyView, Safire Control Center, XMEye, Network State, Audio Recorder, Audio Player, Video Player, RtspPlayer
Applications can also be downloaded from the internet (Android operating system).
Specification
parameters
IP Camera Tester: YES; ONVIF, RTPS, ONVIF Camera test, resolution up to 2592x1520, Network PTZ controller (ONVIF)
Analog camera tester: YES
Digital camera tester: YES; Supported standards: AHD, TVI, CVI
Video Test: YES
Signal mode: NTSC / PAL (Auto)
Video output: 1.0 Vp-p
Display: 4 inches IPS LCD, 800x480
Touch display: YES
LCD settings: Light, Contrast, saturation
Video input: 1x BNC
Video Level test: YES
Level test: Video signals measured in IRE or mV
DC 12V 2A power supply output
DC 12V power supply input
48V DC Power supply for POE cameras
Audio input test: YES
PTZ controller: Communication: Supports RS232 and RS485
PTZ Protocol: over 30 protocols, including PELCO-D / P, Samsung, Panasonic, Lilin, Yaan, etc.
Speed: 600,1200,2400,4800,9600,19200.57600,115200bps
Built-in WIFI network card: YES
RS485 / 232: data analysis; Data Monitor: download and analysis of control data from controlled devices
Recording movies and taking pictures from the displayed image
View saved movies and photos
IP scanning: Link monitor: PING test; Quickly search for a connected IP camera or other IP address of the network device.
Link monitor; Check if the IP address is busy
PING testing; Check the operation of the IP camera or Ethernet port on another network device to see if it works normally, and check the IP address
Rapid Video - One click detects all network cameras and automatically displays the image.
Menu language: English, German, Polish, French
Car only after: 5-60 min
Button sound: On / Off
Operating temperature: -10 ℃ to + 50 ℃
Acceptable humidity: 30% - 90%
Power
Power supply: DC 12V (2A)
Battery: Built-in 7.4V Lithium polymer battery, 2400mAh
Working time: about 7 hours; low energy consumption; battery charge indicator
Additional information
4-inch IPS touch screen with a resolution of 800 * 480
Video mode: CVBS 1-channel BNC, NTSC / PAL (auto adaptation)
PTZ control, RS485 control, Baud 600-115200bps, compatible with over 30 protocols such as PELCO-D / P, Samsung, Panasonic etc.
IP camera test 4K / H.265 / H.264 IP Discovery / Quick test ONVIF / IPC / RTSP play / Client APK
Quick movie. Automatically display video, create test report
Hik test tool pressing only one key to activate the hikvision camera, image test, can modify username, password and IP parameters
Dahua Test Tool Dahua Camera Test, modify username, password and IP parameters
HD coaxial test: TVP 8MP camera test, 3840 x 2160P 15 FPS, control menu / OSD UTC menu
Test camera 4MP CVI, 2560 x 1440P 25/30 FPS, control menu / OSD UTC menu
5MP AHD tes camera, 2560x1944P 12.5F / 20F, UTC control / OSD menu
Enlarge image 4x zoom to enlarge image, Screen Snapshot, record, save, view and record and play back
Output power. Power 12V / 3A. Output DC12V / 3A power supply, temporarily powers the camera
PoE output power 48V PoE output power, max. 24W power
Network test Link monitor, port flashing, Ping test
Audio test 1-channel audio input, check if the sound is normal, 1-channel audio to connect headphones
Data monitor: Captures and analyzes command data from the control device, can also send in hexadecimal
Drop-down menu: You can choose PoE power switch, IP settings, CVBS, LAN information etc. In any interface
External DC 12V 1A power supply
Battery: Built-in 7.4V lithium polymer battery, 2400mAh
Rechargeable After charging 4 ~ 5 hours, normal working time 7 hours
OSD Menu operation setting, select the desired language: English, Chinese, Korean, Russian, Italian, French, Polish, Spanish, Japanese etc.
Automatic switch off: 1-30 (min)
Working temperature: -10ºC --- + 50ºC
Working humidity: 30% -90%
Certificates and standards
CE, RoHS
Kit Contents
Video tester
AC adapter
Bag
Accessories visible in the pictures
User manual
Cardboard packaging
Dimensions, Weight
Product dimensions: 33 x 126 x 83 mm (D x W x H)
Packaging dimensions: 150 x 150 x 150 mm (D x W x H)
Product weight: 320 g
Weight with packaging: 768 g
To download
Specific References
- EAN13
- 6931240016114