Mini Outdoor Dome Camera AHD TVI CVI 1080p CVBS IR LEDs OSD Menu 1 / 2.8 Car Bus Miniature ACTii AC9265
Very good 1 / 2.7 "F22 Silicon Optronics transducer with 1920x1080 resolution and high sensitivity 0.01lux.
ICR mechanical filter, IR illuminator up to 15m
2.8mm lens; Viewing angle: 81 °
OSD menu.
Choice of AHD, TVI, CVI and CVBS standard
The camera is perfect for monitoring vehicles, e.g. buses, trucks, tractors, excavators, bulldozers, cranes. Vandal-proof housing, protection against the possibility of turning the camera, small size, protection against water and dust (IP66). All this makes the camera very often chosen for vehicle monitoring.
NOTE: The standard camera is set to the AHD image format. If you need a different format, analog CVBS, CVI or TVI, please add information about it in the comments to the order, we will change the camera settings to the required format.
Mini Outdoor Dome Camera AHD TVI CVI 1080p CVBS IR LEDs OSD Menu 1 / 2.8 Car Bus Miniature
Model: ACTii AC9265
EAN: 6931240092651 SKU: 926596509
- 1 / 2.7 Silicon Optronics F22 + FH8536 CMOS, Resolution: 1920x1080 FULL HD; Sensitivity: 0.01lux
- Miniature dimensions, only: 50 * 59 * 59mm
- IR illuminator: up to 15m; ICR mechanical filter
- 2.8mm lens, viewing angle: 81 °
- Choice of AHD, CVI, TVI and CVBS standard
- Robust external vandal-proof housing
- The AHD, CVI and TVI interface enables the transmission of analog video signal via coaxial cable in 1080p resolution. This enables the transmission of HD resolution images at distances of up to 500m while maintaining low installation costs.
Description
Robust Outdoor AHD TVI CVI CVBS Dome Camera
Very good 1 / 2.7 "F22 Silicon Optronics transducer with 1920x1080 resolution and high sensitivity 0.01lux.
ICR mechanical filter, IR illuminator up to 15m
2.8mm lens; Viewing angle: 81 °
OSD menu.
Choice of AHD, TVI, CVI and CVBS standard
The camera is perfect for monitoring vehicles, e.g. buses, trucks, tractors, excavators, bulldozers, cranes. Vandal-proof housing, protection against the possibility of turning the camera, small size, protection against water and dust (IP66). All this makes the camera very often chosen for vehicle monitoring.
NOTE: The standard camera is set to the AHD image format. If you need a different format, analog CVBS, CVI or TVI, please add information about it in the comments to the order, we will change the camera settings to the required format.
Specification
Camera type
AHD + CVI + TVI + CVBS (analog)
Converter
1 / 2.7 Silicon Optronics
Matrix size
2 Mpx
Resolution
1920 x 1080 - 1080p
960 x 576 - 960H PAL (CVBS)
Image parameters
Signal / noise ratio (S / N):> 58dB
Scanning system: Progressive
Sensitivity: 0.01LUX (without IR illuminator)
Day / Night mode: YES
Lens
Focal length: 2.8mm
Viewing angle: 81 ° range
light: F 1-1.4
Focus adjustment: Yes, manual
Lens mount: plate cameras
Lens for Mega Pixel cameras: YES; 3Mpix
IR illuminator
YES
Number of IR LEDs: 12x
Backlight range - up to 15m
The range of illumination with IR LEDs depends on the mounting conditions of the camera and the width of the lens viewing angle.
Mechanically moving infrared filter (ICR)
Case
Outer casing: IP67 tightness (dustproof, resistant to very strong water jets from all directions)
Material: Aluminum
Glass cover: Toughened double glass
Temp. working: -30 ° C - + 55 ° C
Black colour
Camera parameters
Sense-UP - (Slow Shutter) - Increasing the transducer sensitivity max. x 30
D-WDR - A wide range of lighting dynamics
DNR - Digital noise reduction in the picture
F-DNR (Defog) - Reduction of noise related to precipitation
BLC - Configurable Back Light Compensation
HSBLC - High Light Compensation (Spot)
Sharpness - Sharpens the outlines of an image
OSD menu: YES, access to the OSD menu is possible by a remote control on the cable and from the recorder level or by a UTC remote control (remote control available in our offer).
All camera parameters can be set in the OSD menu: DNR, WDR, image format (AHD, CVI, TVI, CVBS)
Power
DC 12V 1000mA
Power input: 2.1mm / 5.5mm power jack
Power consumption without IR diodes: 3W
Power consumption with IR diodes: 6W
Lens change service
Lens change service
The cost of the lens change service for the offered camera:
8mm (40 ° viewing angle) - PLN 20
6mm (53 ° viewing angle) - PLN 20
2.8mm (105 ° viewing angle) - PLN 25
2.5mm (115 ° viewing angle) - PLN 30
The wider the angle of view of the lens, the more distant the view from the camera becomes, but the camera image covers a larger area. A lens with a wider angle of view works well when the camera is in close proximity to the monitored object. If, for example: we want to monitor almost the entire room with one camera, we use a 2.8mm, 2.5mm or 2.1mm lens.
The narrower the angle of view, the closer the camera view becomes, and the camera covers a smaller area. A lens with a narrow angle of view is used when we want to monitor an object far away from the camera. Such an object will be much closer with such a lens. The given angles of view may be different than in reality (The same lens inserted into different cameras may give a different angle of view).
Additional information
Cable length: approx. 50 cm
Kit contents
1x Camera
1x Carton
1x User Manual
Certificates and standards
CE
ROHS
Dimensions, Weight
Product dimensions: 59 x 59 x 50 mm (D x W x H)
Packaging dimensions: 87 x 90 x 80 mm (D x W x H)
Product weight: 180 g
Weight with packaging: 216 g
To download
Specific References
- EAN13
- 6931240092651